Malware Green Lambert

Green Lambert is a modular backdoor that security researchers assess has been used by an advanced threat group referred to as Longhorn and The Lamberts. First reported in 2017, the Windows variant of Green Lambert may have been used as early as 2008; a macOS version was uploaded to a multiscanner service in September 2014.


List of techniques used :


id description
T1005 Data from Local System
Adversaries may search local system sources, such as file systems and configuration files or local databases, to find files of interest and sensitive data prior to Exfiltration. Adversaries may do this using a Command and Scripting Interpreter, such as cmd as well as a Network Device CLI, which have functionality to interact with the file system to gather information. Adversaries may also use Automated Collection on the local system.
T1016 System Network Configuration Discovery
Adversaries may look for details about the network configuration and settings, such as IP and/or MAC addresses, of systems they access or through information discovery of remote systems. Several operating system administration utilities exist that can be used to gather this information. Examples include Arp, ipconfig/ifconfig, nbtstat, and route. Adversaries may also leverage a Network Device CLI on network devices to gather information about configurations and settings, such as IP addresses of configured interfaces and static/dynamic routes (e.g. show ip route, show ip interface). Adversaries may use the information from System Network Configuration Discovery during automated discovery to shape follow-on behaviors, including determining certain access within the target network and what actions to do next.
T1027 Obfuscated Files or Information
Adversaries may attempt to make an executable or file difficult to discover or analyze by encrypting, encoding, or otherwise obfuscating its contents on the system or in transit. This is common behavior that can be used across different platforms and the network to evade defenses. Payloads may be compressed, archived, or encrypted in order to avoid detection. These payloads may be used during Initial Access or later to mitigate detection. Sometimes a user's action may be required to open and Deobfuscate/Decode Files or Information for User Execution. The user may also be required to input a password to open a password protected compressed/encrypted file that was provided by the adversary. Adversaries may also use compressed or archived scripts, such as JavaScript. Portions of files can also be encoded to hide the plain-text strings that would otherwise help defenders with discovery. Payloads may also be split into separate, seemingly benign files that only reveal malicious functionality when reassembled. Adversaries may also abuse Command Obfuscation to obscure commands executed from payloads or directly via Command and Scripting Interpreter. Environment variables, aliases, characters, and other platform/language specific semantics can be used to evade signature based detections and application control mechanisms.
T1036.004 Masquerading: Masquerade Task or Service
Adversaries may attempt to manipulate the name of a task or service to make it appear legitimate or benign. Tasks/services executed by the Task Scheduler or systemd will typically be given a name and/or description. Windows services will have a service name as well as a display name. Many benign tasks and services exist that have commonly associated names. Adversaries may give tasks or services names that are similar or identical to those of legitimate ones. Tasks or services contain other fields, such as a description, that adversaries may attempt to make appear legitimate.
T1036.005 Masquerading: Match Legitimate Name or Location
Adversaries may match or approximate the name or location of legitimate files or resources when naming/placing them. This is done for the sake of evading defenses and observation. This may be done by placing an executable in a commonly trusted directory (ex: under System32) or giving it the name of a legitimate, trusted program (ex: svchost.exe). In containerized environments, this may also be done by creating a resource in a namespace that matches the naming convention of a container pod or cluster. Alternatively, a file or container image name given may be a close approximation to legitimate programs/images or something innocuous. Adversaries may also use the same icon of the file they are trying to mimic.
T1037.004 Boot or Logon Initialization Scripts: RC Scripts
Adversaries may establish persistence by modifying RC scripts which are executed during a Unix-like system’s startup. These files allow system administrators to map and start custom services at startup for different run levels. RC scripts require root privileges to modify. Adversaries can establish persistence by adding a malicious binary path or shell commands to rc.local, rc.common, and other RC scripts specific to the Unix-like distribution. Upon reboot, the system executes the script's contents as root, resulting in persistence. Adversary abuse of RC scripts is especially effective for lightweight Unix-like distributions using the root user as default, such as IoT or embedded systems. Several Unix-like systems have moved to Systemd and deprecated the use of RC scripts. This is now a deprecated mechanism in macOS in favor of Launchd. This technique can be used on Mac OS X Panther v10.3 and earlier versions which still execute the RC scripts. To maintain backwards compatibility some systems, such as Ubuntu, will execute the RC scripts if they exist with the correct file permissions.
T1059.004 Command and Scripting Interpreter: Unix Shell
Adversaries may abuse Unix shell commands and scripts for execution. Unix shells are the primary command prompt on Linux and macOS systems, though many variations of the Unix shell exist (e.g. sh, bash, zsh, etc.) depending on the specific OS or distribution. Unix shells can control every aspect of a system, with certain commands requiring elevated privileges. Unix shells also support scripts that enable sequential execution of commands as well as other typical programming operations such as conditionals and loops. Common uses of shell scripts include long or repetitive tasks, or the need to run the same set of commands on multiple systems. Adversaries may abuse Unix shells to execute various commands or payloads. Interactive shells may be accessed through command and control channels or during lateral movement such as with SSH. Adversaries may also leverage shell scripts to deliver and execute multiple commands on victims or as part of payloads used for persistence.
T1070.004 Indicator Removal: File Deletion
Adversaries may delete files left behind by the actions of their intrusion activity. Malware, tools, or other non-native files dropped or created on a system by an adversary (ex: Ingress Tool Transfer) may leave traces to indicate to what was done within a network and how. Removal of these files can occur during an intrusion, or as part of a post-intrusion process to minimize the adversary's footprint. There are tools available from the host operating system to perform cleanup, but adversaries may use other tools as well. Examples of built-in Command and Scripting Interpreter functions include del on Windows and rm or unlink on Linux and macOS.
T1071.004 Application Layer Protocol: DNS
Adversaries may communicate using the Domain Name System (DNS) application layer protocol to avoid detection/network filtering by blending in with existing traffic. Commands to the remote system, and often the results of those commands, will be embedded within the protocol traffic between the client and server. The DNS protocol serves an administrative function in computer networking and thus may be very common in environments. DNS traffic may also be allowed even before network authentication is completed. DNS packets contain many fields and headers in which data can be concealed. Often known as DNS tunneling, adversaries may abuse DNS to communicate with systems under their control within a victim network while also mimicking normal, expected traffic.
T1082 System Information Discovery
An adversary may attempt to get detailed information about the operating system and hardware, including version, patches, hotfixes, service packs, and architecture. Adversaries may use the information from System Information Discovery during automated discovery to shape follow-on behaviors, including whether or not the adversary fully infects the target and/or attempts specific actions. Tools such as Systeminfo can be used to gather detailed system information. If running with privileged access, a breakdown of system data can be gathered through the systemsetup configuration tool on macOS. As an example, adversaries with user-level access can execute the df -aH command to obtain currently mounted disks and associated freely available space. Adversaries may also leverage a Network Device CLI on network devices to gather detailed system information (e.g. show version). System Information Discovery combined with information gathered from other forms of discovery and reconnaissance can drive payload development and concealment. Infrastructure as a Service (IaaS) cloud providers such as AWS, GCP, and Azure allow access to instance and virtual machine information via APIs. Successful authenticated API calls can return data such as the operating system platform and status of a particular instance or the model view of a virtual machine.
T1090 Proxy
Adversaries may use a connection proxy to direct network traffic between systems or act as an intermediary for network communications to a command and control server to avoid direct connections to their infrastructure. Many tools exist that enable traffic redirection through proxies or port redirection, including HTRAN, ZXProxy, and ZXPortMap. Adversaries use these types of proxies to manage command and control communications, reduce the number of simultaneous outbound network connections, provide resiliency in the face of connection loss, or to ride over existing trusted communications paths between victims to avoid suspicion. Adversaries may chain together multiple proxies to further disguise the source of malicious traffic. Adversaries can also take advantage of routing schemes in Content Delivery Networks (CDNs) to proxy command and control traffic.
T1124 System Time Discovery
An adversary may gather the system time and/or time zone settings from a local or remote system. The system time is set and stored by services, such as the Windows Time Service on Windows or systemsetup on macOS. These time settings may also be synchronized between systems and services in an enterprise network, typically accomplished with a network time server within a domain. System time information may be gathered in a number of ways, such as with Net on Windows by performing net time \hostname to gather the system time on a remote system. The victim's time zone may also be inferred from the current system time or gathered by using w32tm /tz. In addition, adversaries can discover device uptime through functions such as GetTickCount() to determine how long it has been since the system booted up. On network devices, Network Device CLI commands such as `show clock detail` can be used to see the current time configuration. In addition, system calls – such as time() – have been used to collect the current time on Linux devices. On macOS systems, adversaries may use commands such as systemsetup -gettimezone or timeIntervalSinceNow to gather current time zone information or current date and time. This information could be useful for performing other techniques, such as executing a file with a Scheduled Task/Job, or to discover locality information based on time zone to assist in victim targeting (i.e. System Location Discovery). Adversaries may also use knowledge of system time as part of a time bomb, or delaying execution until a specified date/time.
T1140 Deobfuscate/Decode Files or Information
Adversaries may use Obfuscated Files or Information to hide artifacts of an intrusion from analysis. They may require separate mechanisms to decode or deobfuscate that information depending on how they intend to use it. Methods for doing that include built-in functionality of malware or by using utilities present on the system. One such example is the use of certutil to decode a remote access tool portable executable file that has been hidden inside a certificate file. Another example is using the Windows copy /b command to reassemble binary fragments into a malicious payload. Sometimes a user's action may be required to open it for deobfuscation or decryption as part of User Execution. The user may also be required to input a password to open a password protected compressed/encrypted file that was provided by the adversary.
T1543.001 Create or Modify System Process: Launch Agent
Adversaries may create or modify launch agents to repeatedly execute malicious payloads as part of persistence. When a user logs in, a per-user launchd process is started which loads the parameters for each launch-on-demand user agent from the property list (.plist) file found in /System/Library/LaunchAgents, /Library/LaunchAgents, and ~/Library/LaunchAgents. Property list files use the Label, ProgramArguments , and RunAtLoad keys to identify the Launch Agent's name, executable location, and execution time. Launch Agents are often installed to perform updates to programs, launch user specified programs at login, or to conduct other developer tasks. Launch Agents can also be executed using the Launchctl command. Adversaries may install a new Launch Agent that executes at login by placing a .plist file into the appropriate folders with the RunAtLoad or KeepAlive keys set to true. The Launch Agent name may be disguised by using a name from the related operating system or benign software. Launch Agents are created with user level privileges and execute with user level permissions.
T1543.004 Create or Modify System Process: Launch Daemon
Adversaries may create or modify Launch Daemons to execute malicious payloads as part of persistence. Launch Daemons are plist files used to interact with Launchd, the service management framework used by macOS. Launch Daemons require elevated privileges to install, are executed for every user on a system prior to login, and run in the background without the need for user interaction. During the macOS initialization startup, the launchd process loads the parameters for launch-on-demand system-level daemons from plist files found in /System/Library/LaunchDaemons/ and /Library/LaunchDaemons/. Required Launch Daemons parameters include a Label to identify the task, Program to provide a path to the executable, and RunAtLoad to specify when the task is run. Launch Daemons are often used to provide access to shared resources, updates to software, or conduct automation tasks. Adversaries may install a Launch Daemon configured to execute at startup by using the RunAtLoad parameter set to true and the Program parameter set to the malicious executable path. The daemon name may be disguised by using a name from a related operating system or benign software (i.e. Masquerading). When the Launch Daemon is executed, the program inherits administrative permissions. Additionally, system configuration changes (such as the installation of third party package managing software) may cause folders such as usr/local/bin to become globally writeable. So, it is possible for poor configurations to allow an adversary to modify executables referenced by current Launch Daemon's plist files.
T1546.004 Event Triggered Execution: Unix Shell Configuration Modification
Adversaries may establish persistence through executing malicious commands triggered by a user’s shell. User Unix Shells execute several configuration scripts at different points throughout the session based on events. For example, when a user opens a command-line interface or remotely logs in (such as via SSH) a login shell is initiated. The login shell executes scripts from the system (/etc) and the user’s home directory (~/) to configure the environment. All login shells on a system use /etc/profile when initiated. These configuration scripts run at the permission level of their directory and are often used to set environment variables, create aliases, and customize the user’s environment. When the shell exits or terminates, additional shell scripts are executed to ensure the shell exits appropriately. Adversaries may attempt to establish persistence by inserting commands into scripts automatically executed by shells. Using bash as an example, the default shell for most GNU/Linux systems, adversaries may add commands that launch malicious binaries into the /etc/profile and /etc/profile.d files. These files typically require root permissions to modify and are executed each time any shell on a system launches. For user level permissions, adversaries can insert malicious commands into ~/.bash_profile, ~/.bash_login, or ~/.profile which are sourced when a user opens a command-line interface or connects remotely. Since the system only executes the first existing file in the listed order, adversaries have used ~/.bash_profile to ensure execution. Adversaries have also leveraged the ~/.bashrc file which is additionally executed if the connection is established remotely or an additional interactive shell is opened, such as a new tab in the command-line interface. Some malware targets the termination of a program to trigger execution, adversaries can use the ~/.bash_logout file to execute malicious commands at the end of a session. For macOS, the functionality of this technique is similar but may leverage zsh, the default shell for macOS 10.15+. When the Terminal.app is opened, the application launches a zsh login shell and a zsh interactive shell. The login shell configures the system environment using /etc/profile, /etc/zshenv, /etc/zprofile, and /etc/zlogin. The login shell then configures the user environment with ~/.zprofile and ~/.zlogin. The interactive shell uses the ~/.zshrc to configure the user environment. Upon exiting, /etc/zlogout and ~/.zlogout are executed. For legacy programs, macOS executes /etc/bashrc on startup.
T1547.015 Boot or Logon Autostart Execution: Login Items
Adversaries may add login items to execute upon user login to gain persistence or escalate privileges. Login items are applications, documents, folders, or server connections that are automatically launched when a user logs in. Login items can be added via a shared file list or Service Management Framework. Shared file list login items can be set using scripting languages such as AppleScript, whereas the Service Management Framework uses the API call SMLoginItemSetEnabled. Login items installed using the Service Management Framework leverage launchd, are not visible in the System Preferences, and can only be removed by the application that created them. Login items created using a shared file list are visible in System Preferences, can hide the application when it launches, and are executed through LaunchServices, not launchd, to open applications, documents, or URLs without using Finder. Users and applications use login items to configure their user environment to launch commonly used services or applications, such as email, chat, and music applications. Adversaries can utilize AppleScript and Native API calls to create a login item to spawn malicious executables. Prior to version 10.5 on macOS, adversaries can add login items by using AppleScript to send an Apple events to the “System Events” process, which has an AppleScript dictionary for manipulating login items. Adversaries can use a command such as tell application “System Events” to make login item at end with properties /path/to/executable. This command adds the path of the malicious executable to the login item file list located in ~/Library/Application Support/com.apple.backgroundtaskmanagementagent/backgrounditems.btm. Adversaries can also use login items to launch executables that can be used to control the victim system remotely or as a means to gain privilege escalation by prompting for user credentials.
T1555.001 Credentials from Password Stores: Keychain
Adversaries may acquire credentials from Keychain. Keychain (or Keychain Services) is the macOS credential management system that stores account names, passwords, private keys, certificates, sensitive application data, payment data, and secure notes. There are three types of Keychains: Login Keychain, System Keychain, and Local Items (iCloud) Keychain. The default Keychain is the Login Keychain, which stores user passwords and information. The System Keychain stores items accessed by the operating system, such as items shared among users on a host. The Local Items (iCloud) Keychain is used for items synced with Apple’s iCloud service. Keychains can be viewed and edited through the Keychain Access application or using the command-line utility security. Keychain files are located in ~/Library/Keychains/, /Library/Keychains/, and /Network/Library/Keychains/. Adversaries may gather user credentials from Keychain storage/memory. For example, the command security dump-keychain –d will dump all Login Keychain credentials from ~/Library/Keychains/login.keychain-db. Adversaries may also directly read Login Keychain credentials from the ~/Library/Keychains/login.keychain file. Both methods require a password, where the default password for the Login Keychain is the current user’s password to login to the macOS host.

List of groups using the malware :


id description

© 2022 The MITRE Corporation. This work is reproduced and distributed with the permission of The MITRE Corporation.