Malware DEADWOOD

DEADWOOD is wiper malware written in C++ using Boost libraries. DEADWOOD was first observed in an unattributed wiping event in Saudi Arabia in 2019, and has since been incorporated into Agrius operations.

Platforms : Windows
Version : 1.0
Created : 22 May 2024
Last Modified : 26 August 2024

List of techniques used :

id	description
T1027.009	Obfuscated Files or Information: Embedded Payloads Adversaries may embed payloads within other files to conceal malicious content from defenses. Otherwise seemingly benign files (such as scripts and executables) may be abused to carry and obfuscate malicious payloads and content. In some cases, embedded payloads may also enable adversaries to Subvert Trust Controls by not impacting execution controls such as digital signatures and notarization tickets. Adversaries may embed payloads in various file formats to hide payloads. This is similar to Steganography, though does not involve weaving malicious content into specific bytes and patterns related to legitimate digital media formats. For example, adversaries have been observed embedding payloads within or as an overlay of an otherwise benign binary. Adversaries have also been observed nesting payloads (such as executables and run-only scripts) inside a file of the same format. Embedded content may also be used as Process Injection payloads used to infect benign system processes. These embedded then injected payloads may be used as part of the modules of malware designed to provide specific features such as encrypting C2 communications in support of an orchestrator module. For example, an embedded module may be injected into default browsers, allowing adversaries to then communicate via the network.
T1027.013	Obfuscated Files or Information: Encrypted/Encoded File Adversaries may encrypt or encode files to obfuscate strings, bytes, and other specific patterns to impede detection. Encrypting and/or encoding file content aims to conceal malicious artifacts within a file used in an intrusion. Many other techniques, such as Software Packing, Steganography, and Embedded Payloads, share this same broad objective. Encrypting and/or encoding files could lead to a lapse in detection of static signatures, only for this malicious content to be revealed (i.e., Deobfuscate/Decode Files or Information) at the time of execution/use. This type of file obfuscation can be applied to many file artifacts present on victim hosts, such as malware log/configuration and payload files. Files can be encrypted with a hardcoded or user-supplied key, as well as otherwise obfuscated using standard encoding/compression schemes such as Base64. The entire content of a file may be obfuscated, or just specific functions or values (such as C2 addresses). Encryption and encoding may also be applied in redundant layers for additional protection. For example, adversaries may abuse password-protected Word documents or self-extracting (SFX) archives as a method of encrypting/encoding a file such as a Phishing payload. These files typically function by attaching the intended archived content to a decompressor stub that is executed when the file is invoked (e.g., User Execution). Adversaries may also abuse file-specific as well as custom encoding schemes. For example, Byte Order Mark (BOM) headers in text files may be abused to manipulate and obfuscate file content until Command and Scripting Interpreter execution.
T1036.004	Masquerading: Masquerade Task or Service Adversaries may attempt to manipulate the name of a task or service to make it appear legitimate or benign. Tasks/services executed by the Task Scheduler or systemd will typically be given a name and/or description. Windows services will have a service name as well as a display name. Many benign tasks and services exist that have commonly associated names. Adversaries may give tasks or services names that are similar or identical to those of legitimate ones. Tasks or services contain other fields, such as a description, that adversaries may attempt to make appear legitimate.
T1124	System Time Discovery An adversary may gather the system time and/or time zone settings from a local or remote system. The system time is set and stored by services, such as the Windows Time Service on Windows or systemsetup on macOS. These time settings may also be synchronized between systems and services in an enterprise network, typically accomplished with a network time server within a domain. System time information may be gathered in a number of ways, such as with Net on Windows by performing net time \hostname to gather the system time on a remote system. The victim's time zone may also be inferred from the current system time or gathered by using w32tm /tz. In addition, adversaries can discover device uptime through functions such as GetTickCount() to determine how long it has been since the system booted up. On network devices, Network Device CLI commands such as `show clock detail` can be used to see the current time configuration. In addition, system calls – such as time() – have been used to collect the current time on Linux devices. On macOS systems, adversaries may use commands such as systemsetup -gettimezone or timeIntervalSinceNow to gather current time zone information or current date and time. This information could be useful for performing other techniques, such as executing a file with a Scheduled Task/Job, or to discover locality information based on time zone to assist in victim targeting (i.e. System Location Discovery). Adversaries may also use knowledge of system time as part of a time bomb, or delaying execution until a specified date/time.
T1140	Deobfuscate/Decode Files or Information Adversaries may use Obfuscated Files or Information to hide artifacts of an intrusion from analysis. They may require separate mechanisms to decode or deobfuscate that information depending on how they intend to use it. Methods for doing that include built-in functionality of malware or by using utilities present on the system. One such example is the use of certutil to decode a remote access tool portable executable file that has been hidden inside a certificate file. Another example is using the Windows copy /b command to reassemble binary fragments into a malicious payload. Sometimes a user's action may be required to open it for deobfuscation or decryption as part of User Execution. The user may also be required to input a password to open a password protected compressed/encrypted file that was provided by the adversary.
T1485	Data Destruction Adversaries may destroy data and files on specific systems or in large numbers on a network to interrupt availability to systems, services, and network resources. Data destruction is likely to render stored data irrecoverable by forensic techniques through overwriting files or data on local and remote drives. Common operating system file deletion commands such as del and rm often only remove pointers to files without wiping the contents of the files themselves, making the files recoverable by proper forensic methodology. This behavior is distinct from Disk Content Wipe and Disk Structure Wipe because individual files are destroyed rather than sections of a storage disk or the disk's logical structure. Adversaries may attempt to overwrite files and directories with randomly generated data to make it irrecoverable. In some cases politically oriented image files have been used to overwrite data. To maximize impact on the target organization in operations where network-wide availability interruption is the goal, malware designed for destroying data may have worm-like features to propagate across a network by leveraging additional techniques like Valid Accounts, OS Credential Dumping, and SMB/Windows Admin Shares.. In cloud environments, adversaries may leverage access to delete cloud storage objects, machine images, database instances, and other infrastructure crucial to operations to damage an organization or their customers.
T1531	Account Access Removal Adversaries may interrupt availability of system and network resources by inhibiting access to accounts utilized by legitimate users. Accounts may be deleted, locked, or manipulated (ex: changed credentials) to remove access to accounts. Adversaries may also subsequently log off and/or perform a System Shutdown/Reboot to set malicious changes into place. In Windows, Net utility, Set-LocalUser and Set-ADAccountPassword PowerShell cmdlets may be used by adversaries to modify user accounts. In Linux, the passwd utility may be used to change passwords. Accounts could also be disabled by Group Policy. Adversaries who use ransomware or similar attacks may first perform this and other Impact behaviors, such as Data Destruction and Defacement, in order to impede incident response/recovery before completing the Data Encrypted for Impact objective.
T1561.001	Disk Wipe: Disk Content Wipe Adversaries may erase the contents of storage devices on specific systems or in large numbers in a network to interrupt availability to system and network resources. Adversaries may partially or completely overwrite the contents of a storage device rendering the data irrecoverable through the storage interface. Instead of wiping specific disk structures or files, adversaries with destructive intent may wipe arbitrary portions of disk content. To wipe disk content, adversaries may acquire direct access to the hard drive in order to overwrite arbitrarily sized portions of disk with random data. Adversaries have also been observed leveraging third-party drivers like RawDisk to directly access disk content. This behavior is distinct from Data Destruction because sections of the disk are erased instead of individual files. To maximize impact on the target organization in operations where network-wide availability interruption is the goal, malware used for wiping disk content may have worm-like features to propagate across a network by leveraging additional techniques like Valid Accounts, OS Credential Dumping, and SMB/Windows Admin Shares.
T1561.002	Disk Wipe: Disk Structure Wipe Adversaries may corrupt or wipe the disk data structures on a hard drive necessary to boot a system; targeting specific critical systems or in large numbers in a network to interrupt availability to system and network resources. Adversaries may attempt to render the system unable to boot by overwriting critical data located in structures such as the master boot record (MBR) or partition table. The data contained in disk structures may include the initial executable code for loading an operating system or the location of the file system partitions on disk. If this information is not present, the computer will not be able to load an operating system during the boot process, leaving the computer unavailable. Disk Structure Wipe may be performed in isolation, or along with Disk Content Wipe if all sectors of a disk are wiped. On a network devices, adversaries may reformat the file system using Network Device CLI commands such as `format`. To maximize impact on the target organization, malware designed for destroying disk structures may have worm-like features to propagate across a network by leveraging other techniques like Valid Accounts, OS Credential Dumping, and SMB/Windows Admin Shares.
T1569.002	System Services: Service Execution Adversaries may abuse the Windows service control manager to execute malicious commands or payloads. The Windows service control manager (services.exe) is an interface to manage and manipulate services. The service control manager is accessible to users via GUI components as well as system utilities such as sc.exe and Net. PsExec can also be used to execute commands or payloads via a temporary Windows service created through the service control manager API. Tools such as PsExec and sc.exe can accept remote servers as arguments and may be used to conduct remote execution. Adversaries may leverage these mechanisms to execute malicious content. This can be done by either executing a new or modified service. This technique is the execution used in conjunction with Windows Service during service persistence or privilege escalation.

List of groups using the malware :

id	description
G0064	APT33 APT33 is a suspected Iranian threat group that has carried out operations since at least 2013. The group has targeted organizations across multiple industries in the United States, Saudi Arabia, and South Korea, with a particular interest in the aviation and energy sectors.
G1030	Agrius Agrius is an Iranian threat actor active since 2020 notable for a series of ransomware and wiper operations in the Middle East, with an emphasis on Israeli targets. Public reporting has linked Agrius to Iran's Ministry of Intelligence and Security (MOIS).